Month: July 2019

Good idea. We will try to arrange for something like that, using the commercial hardware.

at TECHNICAL REFERENCE and PRELIMINARY TEST PROCEDURE(Updated 17 July 2019) ,their efficiency map has different condition which one is correct? The preliminary test procedure is a work-in progress document as we set-up the automated and …

Is the converter operation supposed to shut down the converter if over-speed is reached? I am asking because of the free acceleration test, “d. Free Acceleration This test will be evaluated pass/fail. Must complete accel …

Please make your own reservations, and we will arrange for reimbursement after the event.

We found the parking lot in Madison on google maps, and it seems there is about 220m per lap. The Techincal Reference says 400m per lap. Which information is correct? Is the total race length …

Is it required to provide a 5V output during “Disabled State” (Battery Current <1mA) ? No. 5V is used to power the Hall sensors routed through the connectors. As long as you have an internally …

According to the most recent change of rules related to LED signalization, it is required to detected that Hall Sensors are disconnected even when e-stop is on (Basic operation test C.d.iv. in Test Procedure Document). …

LED indicators are not required when the E-Stop is ON (open).

The preliminary final competition test procedure has been published. Preliminary Test Procedure

June 17th- Section 14 – Indicator lights are not required when the E-Stop is ON (open). June 12th – The following changes were made to the Technical reference guide. Section 9.a – Switched throttle connector …